Air Conditioning Installation Commissioning This article is the last in the line of a series of nine YouTube videos, and accompanying blogs, on how to install a ductless mini-split air conditioner. Persons with DIY experience and those training in the HVAC industry should perform the guide, as detailed and straightforward as it has been presented. Furthermore,
Every office air conditioning installation requires careful detail and attention given to the pre commissioning works prior to a run test. During a commercial office air conditioning installation a lot of brazing will have taken place. In addition, there will be lots of flare connections and the fitting of pipe branch work with VRV installations.
Comfort Cooling and Power Supply Installations Only a qualified electrician or technically trained individual should under take electrical installation work. Qualified comfort cooling engineers should undertake small residential air conditioning installations. Additionally, the electrical installation must be signed off and tested by an appropriately qualified person if coming from the main fuse board. If the power supply is coming from
Home AC Running refrigerant lines and connecting the condenser flare connections on a home AC system. The function and life span of a newly installed commercial or domestic air conditioning installation relies on good copper pipe installations. The pipe ends must be sealed at all times to stop debris and moisture entering unnecessarily. The system life greatly reduces and acid mixture
Air Conditioning Installers recommend anti vibration condenser feet. The condenser (outdoor unit) is the heart beat of every climate control system. Residential air conditioning systems can have the smallest condensers with the capacity to service one small room. A commercial air conditioning system can have a bank of linked condensers capable of servicing hundreds of indoor ac units.
Wiring and fitting the fused spur on indoor home air conditioning systems. The video attached shows how to fit a 13amp fused spur with the interconnecting ac feed cable, condensate pump power and over flow contacts. The interconnecting cable of a split Home Air Conditioning Systems will be a four core cable that is 1.5mm and
Please read the information below before watching our video on Air Conditioning System. Brazing is a task that goes hand in hand with every air conditioning installation. The purpose of brazing is to join various lengths of copper pipe. Every air conditioning system installation is different so the copper pipes need to be manipulated into the correct positions. Even the most experienced
Domestic Air conditioning and the use of Condensate Pumps. Water leaking domestic air conditioning units are number two on the list of call out issues reported for AC breakdowns. This happens directly after an air conditioning install due to the incorrect fitting or years later through lack of air conditioning servicing. Retro fit residential air conditioning units will 9 times out